Position: Die Cutting Machine Operator
PRIMARY FUNCTION:
To use any one of the following presses; Clicker, CNC Traveling Head Press, X-Y Cutter or Traveling Head Press in accordance with Seal & Design Inc work instructions for die cutting operation in producing a die cut product to a customer specification.
DUTIES AND RESPONSIBILITIES:
• Review the router for correct material, tooling and delivery date.
• Set up press with the proper tooling and depth of cut.
• Perform first piece cut and check for proper depth.
• Perform first piece and in-process inspection when required if math qualified, or send to Quality Control for inspection.
• Run the job to produce the correct quantity of product.
• Spot check die cuts during cutting and notify supervisor of any quality or mechanical problems.
• Record accurate times on the router for each job performed.
• Bundle and tag all usable centers with traceability information as required in the work instruction.
• Follow work instructions for each area of the fabrication department.
• Follow all safety instruction.
• Maintain good housekeeping as required.
• Report quality problems to applicable supervisor.
• Responsible to follow departmental procedures and work instructions as written and recommend improvements as necessary.
• Any other task/activity assigned by the supervisor within the scope of the fabrication system.
SUPERVISORY REQUIREMENTS:
This position requires general direction and guidance and has no supervisory responsibilities.
SKILL REQUIREMENTS:
This position requires the following skills including but not limited to die set up, reading, blue print reading and basic math and basic computer skills. Auto Cad experience and mechanical aptitude is most desirable.
PHYSICAL REQUIREMENTS:
This is a physically active position requiring the ability to sit or stand for up to 8 hours, lift from less than 1 lb. Up to 80 lb. Up to 4X daily, pull from less that 1 lb. Up to 80 lb. Up to 4X daily, carry, grasp, reach, see color variations and see up close.
EDUCATIONAL AND EXPERIENCE REQUIREMENTS:
The minimum requirement for this position is a High School Diploma, GED or vocational degree and 6 months to 2 years of job specific experience.
________________________________________
We offer an excellent compensation and benefits package.
Please submit a copy of your credentials/resume, indicating the position in which you are interested to:
Email:
careers@sealanddesign.com
Mail:
Printer-Friendly Version
Seal & Design Inc
4015 Casilio Parkway
Clarence, NY 14031
Attn: Human Resources
Fax:
716-759-1467
Attn: Human Resources
To use any one of the following presses; Clicker, CNC Traveling Head Press, X-Y Cutter or Traveling Head Press in accordance with Seal & Design Inc work instructions for die cutting operation in producing a die cut product to a customer specification.
DUTIES AND RESPONSIBILITIES:
• Review the router for correct material, tooling and delivery date.
• Set up press with the proper tooling and depth of cut.
• Perform first piece cut and check for proper depth.
• Perform first piece and in-process inspection when required if math qualified, or send to Quality Control for inspection.
• Run the job to produce the correct quantity of product.
• Spot check die cuts during cutting and notify supervisor of any quality or mechanical problems.
• Record accurate times on the router for each job performed.
• Bundle and tag all usable centers with traceability information as required in the work instruction.
• Follow work instructions for each area of the fabrication department.
• Follow all safety instruction.
• Maintain good housekeeping as required.
• Report quality problems to applicable supervisor.
• Responsible to follow departmental procedures and work instructions as written and recommend improvements as necessary.
• Any other task/activity assigned by the supervisor within the scope of the fabrication system.
SUPERVISORY REQUIREMENTS:
This position requires general direction and guidance and has no supervisory responsibilities.
SKILL REQUIREMENTS:
This position requires the following skills including but not limited to die set up, reading, blue print reading and basic math and basic computer skills. Auto Cad experience and mechanical aptitude is most desirable.
PHYSICAL REQUIREMENTS:
This is a physically active position requiring the ability to sit or stand for up to 8 hours, lift from less than 1 lb. Up to 80 lb. Up to 4X daily, pull from less that 1 lb. Up to 80 lb. Up to 4X daily, carry, grasp, reach, see color variations and see up close.
EDUCATIONAL AND EXPERIENCE REQUIREMENTS:
The minimum requirement for this position is a High School Diploma, GED or vocational degree and 6 months to 2 years of job specific experience.
________________________________________
We offer an excellent compensation and benefits package.
Please submit a copy of your credentials/resume, indicating the position in which you are interested to:
Email:
careers@sealanddesign.com
Mail:
Printer-Friendly VersionSeal & Design Inc
4015 Casilio Parkway
Clarence, NY 14031
Attn: Human Resources
Fax:
716-759-1467
Attn: Human Resources
Contact Us
Click Below for:
Seal & Design, Inc.
4015 Casilio Parkway
Clarence, New York 14031
Phone: 716.759.2222
Fax: 716.759.6425
E-mail: 
For Seal & Design TS-16949
certificate click on logo below
certificate click on logo below