Loctite Cleaners and Degreasers

Loctite Cleaners and Degreasers

Loctite Cleaners Loctite® cleaners and degreasers are highly effective and are available in both aqueous and solvent-based formulations. When choosing a cleaner or degreaser, the major factors to consider are dry time, residue, odor, and substrate compatibility. Residue is a particularly important concern because if there is any secondary processing of the part, e.g. painting or bonding, a residue could interfere with that process. Substrate compatibility is commonly a concern when dealing with plastics and solvent-based cleaners.

To purchase Loctite Anaerobic Gaskets products, call us at (716) 759-3344 or email us today.


Loctite Variety Notes
NATURAL BLUE BIODEGRADABLE CLEANER & DEGREASER All purpose, industrial strength, concentrated cleaner and degreaser. Can be economically diluted with water. Natural Blue® is formulated for wipe down, pressure spraying, and immersion cleaning processes – at room temperature or heated. Pinescented, non- flammable, and non- toxic. Contains no ozonedepleting chemicals (ODCs). CFIA approved.
Same product as Loctite® Natural Blue® Biodegradable Cleaner & Degreaser but without the fragrance. It can be used in all departments of a food processing plant. Contains no ozone-depleting chemicals (ODCs). CFIA approved.
AQUA POWER BIODEGRADABLE CLEANER & DEGREASER Penetrates, dissolves and removes dirt and oil. Fast drying and residue -free. Environmentally friendly product is biodegradable, has low toxicity, contains no ozone- depleting chemicals (ODCs), and is non-corrosive/non-caustic.
ODC-FREE CLEANER & DEGREASER (NAPHTHA) A non-aqueous, hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives, as well as for general purpose industrial cleaning. Safe on aluminum, rubber and most plastics, and will not cause flash rusting on water sensitive parts. Dries residue-free. Contains no ozone-depleting compounds. Formerly referenced as 7070.) SF K1 approved.
LOCTITE RO STRENGTH DEGREASER Quickly dissolves and removes grease, oil, and dirt from iron, steel, aluminum, magnesium, copper, rubber, plastic, and concrete. Rinses off with water.


Loctite Variety Notes
ELECTRICAL CONTACT & PARTS CLEANER Fast-evaporating cleaner removes grease, oil, and other contaminants from electrical parts and mechanical equipment. Contains no CFCs or HCFCs and is safe on most plastics. Non-conductive, non-corrosive.
Removes grease, oil, and other contaminants from electrical parts to prevent contact failure. Dries residue -free in seconds. Non-conductive, non- corrosive, non- flammable. Contains no CFCs or Class I ozone-depleting chemicals (ODCs). Contains HCFC-141b. May attack some sensitive plastics.
NON-FLAMMABLE ELECTRICAL CONTACT CLEANER Use as an electrical contact cleaner to remove grease, dirt, oil, and other surface contaminants from sensitive electrical /electronic parts. Non- flammable, fast evaporating and leaves no residue. Contains no HCFCs or CFCs.


Loctite Variety Notes
CHISEL GASKET REMOVER (METHYLENE CHLORIDE) Removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Works on wood; noncorrosive on aluminum. Not for use on plastics, linoleum, or synthetic fibers. CFIA approved.
CHISEL MC-FREE GASKET REMOVER Free of Methylene Chloride, Loctite® Chisel® MC-Free Gasket Remover has a foaming action that lifts off gaskets from any type of assembly in minutes. Performs better than Methylene Chloride formulations on silicone gaskets and removes most spray paints from steel panels in less than 30 seconds. Convenient spray liquid penetrates and cleans intricate shapes and will not run off, even on vertical surfaces. Suitable for wood and plaster. Not for use on plastics, linoleum, or synthetic fibers.


Loctite Variety Notes
MULTI-PURPOSE GLASS CLEANER Fast-acting, professional strength cleaner removes tough grease and dirt from glass, chrome, aluminum, stainless steel, and enamel finishes. Orange-scented formula will not run or streak. Contains no ozone-depleting chemicals (ODCs).
INDUSTRIAL HAND WIPES Pre-moistened with a powerful citrus-scented cleaning formula that is abrasive enough to scrub off the toughest grease and grime. Quick and easy-to-use, these 9.5" x 12" towels eliminate rinsing and drying and leave no residue behind. Perfect for industrial and commercial environments in the painting, printing, maintenance, transportation, and construction industries.


Loctite Variety Notes
NON-CHLORINATED PARTS CLEANER Penetrates, dissolves, and removes dirt and oil from metal parts. Leaves no residue. Does not contain 1,1,1-trichlorethane; helps manage EPA halide limits.
PRO STRENGTH PARTS CLEANER Agressively penetrates, dissolves, and removes oil and grease from parts. Dries quickly with no residue. Contains no ozone-depleting chemicals (ODCs).
768 X-NMS CLEAN-UP SOLVENT Quickly and safely dissolves cured cyanoacrylate-based adhesives.


Loctite Variety Notes
PRO STRENGTH VARNISH REMOVER Super jet spray quickly cuts and removes grease, gum, and varnish from chokes, baffle plates, and carburetor linkage. Improves performance and fuel efficiency.
INDUSTRIAL STRENGTH PAINT STRIPPER Quickly strips and removes paint. Eliminates sanding and scraping. Works in 10 to 15 minutes at temperatures from -40°F to 100°F. Contains no ozone-depleting chemicals (ODCs).