GPlast O-Ring Material

GPlast

GPlast O-Rings

Gapi Logo GPlast perfluoroelastomer o-ring material is high performance perfluoroelastomer. These compounds were formulated to meet the needs of a variety of industries including aerospace, automotive, chemical processing, construction, food, gas, heavy industry, oil, pharmaceutical, and semi-conductor. 

 

GPlast Material Technical Specs

GPlast
O-ring
Compound
General Description Avg. Temp
Ranges
Datasheet
(PDF)
GPlast 260B Universal Black This black material provides excellent temperature resistance up to 500°F (260°C) and has similar chemical resistance to that of PTFE but with elastomeric properties comparable to standard fluorocarbon rubbers. up to 500°F
(260°C)
GPlast 260B Universal Black
Datasheet
GPlast 260W This white material provides excellent temperature resistance up to 500°F(260°C) and has similar chemical resistance to that of PTFE but with elastomeric properties comparable to standard fluorocarbon rubbers. Developed to applications where carbon black filled materials are not suitable. 5°F to 500°F
(-15°C to 260°C)
GPlast 260W
Datasheet
GPlast 300B High Temp. This black material provides excellent temperature resistance up to 572°F (300°C) and has similar chemical resistance to that of PTFE but with elastomeric properties. Developed for high temperature water and steam applications. up to 572°F
(300°C)
GPlast 300B Ultra
Datasheet
GPlast 300W Ultra Pure This white material provides excellent temperature resistance up to 572°F(300°C) and has similar chemical resistance to that of PTFE but with elastomeric properties comparable to standard fluorocarbon rubbers. It has been formulated specifically for use in the semiconductor industry to offer low weight loss in oxygen and fluorine-based plasma with low outgassing. up to 572°F
(300°C)
GPlast 300W Ultra
Datasheet
GPlast 316B High Temp. This black material provides excellent temperature resistance up to 600°F (316°C) and has similar chemical resistance to that of PTFE but with elastomeric properties. Developed for optimum resistance through thermal cycling. 5°F to 600°F
(-15°C to 316°C)
GPlast 316B
Datasheet
GPlast 330B Ultra This black material has the highest thermal rate of the GPlast grades. It was developed for performance at constant elevated temperatures. 5° to 626°F
(-15°C to 330°C)
GPlast 330B Ultra
Datasheet
GPlast 641W FDA This white material provides excellent temperature resistance and has similar chemical resistance to that of PTFE. This material is formulated to comply with FDA requirement: FDA 21 CFR 177.2600. 5° to 500°F
(-15°C to 260°C)
GPlast 641W FDA
Datasheet
GPlast 642B FDA This black material provides excellent temperature resistance and has similar chemical resistance to that of PTFE. This material is formulated to comply with FDA requirement: FDA 21 CFR 177.2600. 5° to 500°F
(-15°C to 260°C)
GPlast 642B FDA
Datasheet
GPlast 643 USP Class VI This white material has been specifically developed for use with a wide range of potent active pharmaceutical ingredients (API's) and aggressive cleaning agents, being especially suited to withstand steam-in-place(SIP) and clean-in-place(CIP)procedures. 14°F to 446°F
(-10°C to 230°C)
GPlast 643 USP
Datasheet
GPlast LT-40 This black low temperature material is suitable for applications in cold temperatures down to -40°F (-40°C) -40°F to 500°F
(-40°C to 240°C)
GPlast LT-40
Datasheet

 

Oil & Gas AED Resistant

GPlast
O-ring
Compound
General Description Avg. Temp
Ranges
Datasheet
(PDF)
ED105 This black explosive decompression material provides excellent temperature range and high-pressure resistance. 5°F to 500°F
(-15°C to 260°C)
GPlast ED105
Datasheet
T128 NORSOK This compound is designed to give the best performance for rapid gas decompression and meets the requirements of NORSOK standard M-710 rev 2. -40°F to 450°F
(-40°C to 230°C)
GPlast T128 NORSOK
Datasheet
300B AED This black anti-explosive decompression material has an excellent service temperature range. Developed for optimum resistance through thermal cycling and suitable for high water temperature and steam applications. 5°F to 572°F
(-15°C to 300°C)
GPlast 300B AED
Datasheet
316B AED Resistant This black anti-explosive decompression material has an excellent service temperature range. Developed for optimum resistance through thermal cycling. 5°F to 600°F
(-15°C to 316°C)
GPlast 316B AED Resistant
Datasheet