Seal & Design Inc. | Seal & Gasket Manufacturer | Custom Seals | Hallite Technical Information - Operating Conditions

Hallite Seals - Operating Conditions

From many years of application experience with sealing hydraulic equipment, supported by the results from an extensive test program, we know that it is necessary to link the three main operating features of speed, pressure, and temperature to achieve a satisfactory seal performance. After carefully considering each product we are able to specify the maximum speed and pressure with a temperature range within which the seal will operate safely.

Duty Comparison Chart

CylinderSpecification
Light Duty
Medium Duty
Heavy Duty
Pressure
     Max.
     Normal
     Working

350 bar 5000 psi
160 bar 2300 psi
No Pressure Peaks

500 bar 7500 psi
250 bar 3600 psi
Intermittent Pressure Peaks

700 bar 10000 psi
400 bar 6000 pis
Regular Pressure Peaks
Design
Lower operating stresses. Rigid well aligned mounting, minimal side loading.
Steady operating stresses with intermittent high stress, some side loading.
Highly stressed for majority of its working life. Side loading common.
Condition of Fluid
Good system filtration no cylinder contamination likely.
Good system filtration but some cylinder contamination likely.
Contamination unavoidable from internal and external sources.
Working Environment
Clean, and inside a building. Operating temperature variations limited.
Mixture of indoor & outdoors but some protection from the weather.
Outdoors all the time or a dirty indoor area. Wide variations in temperature, both ambient & working. Difficult services conditions
Usage
Irregular with short section of stroke at working pressures. Regular usage but at low pressure.
Regular usage with most of the stroke at working pressure.
Large amount of usage at high pressure with peaks throughout the stroke.
Typical Applications
Machine tools, lifting equipment, mechanical handling, injection moulding machines, control and robot equipment, agricultural machinery, packaging equipment, aircraft equipment & light duty tippers.
Heavy duty lifting equipment, agricultural equipment, light duty off road vehicles, cranes & lifting platforms, heavy duty machine tool & injection moulding machines, some auxiliary mining machinery, aircraft equipment, presses, heavy duty tippers (telescopic), heavy duty mechanical handling.
Foundry & metal fabrication plant, mining machinery, roof supports, heavy duty earth moving machinery, heavy duty off-road vehicles, heavy duty presses.