Hallite Wipers

Hallite Wipers

Hallite WipersWipers are installed in the sealing configurations of hydraulic cylinders to prevent contaminants such as dirt, dust and moisture from entering the cylinder as they retract back into the system.

Contamination can cause significant damage to the rod, cylinder wall, seals, and other components, and is one of the primary causes of premature seal and component failure in a fluid power system.

Umbrella wiper technology prevents ingress of moisture and slurry.

Hallite Wiper Offerings

Profile
Style
Temp. Range
Max Speed
Features
Datasheet
Hallite Wiper 33
33
-30°C to 100°C
4.0m/sec
  • Wide range of sizes
  • Seal on housing and rod
Hallite Wiper 33 PDF
Hallite Wiper 38
38
-40°C to 120°C
4.0m/sec
  • Outside lip for effective housing seal
  • Pressure relief ribs
  • Effective scraping lip
Hallite Wiper 38 PDF
Hallite Wiper 335
335
-30°C to 100°C
5m/sec
  • Extends seal life
  • Low friction no stick-slip
  • Wide range of dimensions
Hallite Wiper 335 PDF
Hallite Wiper 425
425
-30°C to 100°C
1m/sec
  • Variety of materials
  • Twin lip design ensure drier sealing system
  • High flexibility
Hallite Wiper 425 PDF
Hallite Wiper 520
520
-40°C to 110°C
4.0m/sec
  • Precision trimmed sealing lip
  • 'Crush lip' and 'face bead' provide effective seal on housing
  • Low wear, long life
  • Cost effective
  • Pressure relief ribs
  • Hallite 361 or polyester material for heavy duty applications
Hallite Wiper 520 PDF
Hallite Wiper 521
521
-40°C to 110°C
4m/sec
  • Precision trimmed sealing lip
  • 'Crush lip' and 'face bead' provide effective seal on housing
  • Low wear, long life
  • Pressure relief ribs
  • Polyester material for heavy duty applications
Hallite Wiper 521 PDF
Hallite Wiper 820
820
-45°C to 110°C
4.0m/sec
  • Protective lips
  • I.D ribbing for stability, reduced friction, and prevention of pressure trapping
Hallite Wiper 820 PDF
Hallite Wiper 831
831
-30°C to 100°C
4.0m/sec
  • Precision trimmed sealing lip
  • ‘Crush lip’ and ‘Face bead’ provide effective seal on housing
  • Low wear, long life
  • Cost effective
  • Pressure relief ribs
Hallite Wiper 831 PDF
Hallite Wiper 834
834
-45°C to 110°C
4.0m/sec
  • Snug fit provides effective sealing
  • Low wear, long life
  • Pressure relief ribs
  • Precision trimmed wiping lip
Hallite Wiper 834 PDF
Hallite Wiper 839
839
-45°C to 110°C
4.0m/sec
  • Twin lip drier
  • Hard wearing material for long life
Hallite Wiper 839 PDF
Hallite Wiper 839N
839N
-45°C to 110°C
4.0m/sec
  • Twin lip drier
  • Hard wearing material for long life
Hallite Wiper 839N PDF
Hallite Wiper 840
840
-45°C to 110°C
4m/sec
  • Precision trimmed wiping lip
  • Built-in rub to effectively seal the housing
  • Extremely flexible
  • Easy installation
Hallite Wiper 840 PDF
Hallite Wiper 841
841
-45°C to 110°C
4m/sec
  • Precision trimmed wiping lip
  • Excellent resistance to abrasion
  • Extremely flexible
  • Interchangeable with other common styles
Hallite Wiper 841 PDF
Hallite Wiper 842
842
-45°C to 110°C
4.0m/sec
  • Developed for harsh envirionments
  • Flap on wiping lip covers the gland housing
Hallite Wiper 842 PDF
Hallite Wiper 844
844
-45°C to 110°C
4m/sec
  • Tolerant to rod deflection
  • Water/slurry trap prevention
  • Textured wiping lip option
  • Range of materials
Hallite Wiper 844 PDF
Hallite Wiper 846
846
-45°C to 110°C
4.0m/sec
  • Twin lip - no leakage
  • Trapped pressure, automatically released through bursting membranes
  • No push out of the wiper through build up of pressure
  • No gland vent hole necessary
  • Sealing flap protects against ingress of dirt and moisture around outside diameter
Hallite Wiper 846 PDF
Hallite Wiper 860
860
-40°C to 100°C
1.0m/sec
  • Ease of assembly
  • Long life
  • Precision trimmed wiping lip
  • Metal case treated with a with a rust inhibitor
  • Range includes ISO & standard Asian housings
Hallite Wiper 860 PDF
Hallite Wiper 862
862
-40°C to 100°C
1.0m/sec
  • Ease of assembly
  • Long life
  • Precision trimmed wiping lip
  • Metal case treated with a with a rust inhibitor
  • Wide range of appliation uses
Hallite Wiper 862 PDF
Hallite Wiper 864
864
-45°C to 110°C
1m/sec
  • Long life
  • Textured wiping lip minimising oil transfer
  • Nitrided metal case
  • Wide range of application uses
Hallite Wiper 864 PDF
Hallite Wiper E2W
E2W
-45°C to 200°C
15m/sec
  • Low friction and elimination of stick-slip action
  • Self-adjustment for side movement of rod
  • High-performance PTFE material as standard offering
  • Balanced design
Hallite Wiper E2W PDF
Hallite Wiper E5W
E5W
-45°C to 200°C
15m/sec
  • Low friction and elimination of stick-slip action
  • Self-adjustment for side movement of rod
  • High-performance PTFE material as standard offering
  • Balanced design
Hallite Wiper E5W PDF
Hallite Wiper ELA
ELA
-45°C to 200°C
4m/sec
  • Low friction and elimination of stick-slip
  • Excellent in high-speed applications
  • More stable design for application with excessive side-to-side movement on rod
Hallite Wiper ELA PDF
Hallite Wiper EXF
EXF
-45°C to 200°C
15m/sec
  • Low friction and elimination of stick-slip
  • Excellent in high-speed applications
  • More stable design for application with excessive side-to-side movement on rod
  • Balanced design
Hallite Wiper EXF PDF
Hallite Wiper EXG
EXG
-45°C to 200°C
5m/sec
  • Low friction and elimination of stick-slip
  • Excellent in high-speed applications
  • More stable design for application with excessive side-to-side movement on rod
  • Balanced design
Hallite Wiper EXG PDF