Thermoseal / Klinger - Beater Add - RG-N120

RG-N120 is a reinforced cellulose gasket material with a nitrile butadiene rubber binder and inorganic fillers that provides a very good crush resistance at high flange pressures. Continuous roll lengths allow efficient and economical fabrication with high speed die cutting equipment. RG-N120 seals oil, water, and coolants well in applications such as small engine intake and cover gaskets, automotive water pump and throttle body gaskets and similar applications with intermittent operating temperatures up to 350° F (177° C).

RG-N120 PDF

Property
Value
Ref. Thickness of Measured Values
0.031" (0.8mm)
Density ASTM F1315
75 lbs/ft3 (1.20 g/cm3)
Compressibility ASTM F36J
25 - 35%
Recovery ASTM F36J
minimum 30%
Tensile Strength ASTM F152
minimum 1305 psi (9 MPa)
Fluid Resistance
 
After immersion in Fuel B
     Weight Increase
     Thickness Increase
After immersion in Oil IRM903
     Weight Increase
     Thickness Increase

maximum 30%
maximum 10%

maximum 40%
maximum 15%
Binder Type
Nitrile Butadiene Rubber
ASTM F104 Line Call Out
F729900E59M9