Thermoseal / Klinger - Beater Add - RG-P160

Thermoseal / Klinger - Beater Add - RG-P160

RG-P160 is a blended fiber and polychloroprene rubber gasket material with mineral fillers. A factory applied release coating on both sides aid in flange removal. Continuous roll lengths allow efficient and economical fabrication with high speed die cutting equipment. RG-P160 provides excellent sealing of oils, alcohols, and refrigerants in applications as varied as hermetic compressors and heavy duty diesel engines. It is also well suited for general automotive sealing applications such as water pump, front cover and similar applications with demand for low flange pressure sealability and torque retentiion. Suitable for applications with intermittent operating temperatures up to 400° F (204° C).

RG-P160 PDF

Property
Value
Ref. Thickness of Measured Values
0.031" (0.8mm)
Density ASTM F1315
100 lbs/ft3 (1.60 g/cm3)
Compressibility ASTM F36J
11 - 25%
Recovery ASTM F36J
minimum 45%
Tensile Strength ASTM F152
minimum 1450 psi (10 MPa)
Fluid Resistance
 
After immersion in Fuel B
     Weight Increase
     Thickness Increase
After immersion in Oil IRM903
     Weight Increase
     Thickness Increase

maximum 20%
maximum 22%

maximum 27%
maximum 25%
Binder Type
Polychloroprene Rubber
ASTM F104 Line Call Out
F7290000M5