TF74C Single Turn / TF74S Solid Extended Series
Contact Us For Assistance Or Samples Click Here and contact us today to receive a free quote or if you have any questions regarding sizing.


Notes:
1. All dimensions are in inches
2. Surfaces shall be smooth and free from irregularities. Edges shall be clear and sharp.
3. Scarf cut: Placing Back-Up Ring over mandrel of Ø M ±0.001 scarf cut gap shall not exceed dimension G and no overlap of the scarf ends is permitted beyond dimension T.
4. Direction of scarf cut is optional. Exceptions to scarf cut angle:
DASH NO. | Nom. Tube O.D | M | W ±0.001 | T ±0.001 |
---|---|---|---|---|
-02 | 1/8 | 0.246 | 0.122 | 0.056 |
-03 | 3/16 | 0.309 | 0.112 | 0.056 |
-04 | 1/4 | 0.360 | 0.177 | 0.061 |
-05 | 5/16 | 0.423 | 0.177 | 0.061 |
-06 | 3/8 | 0.478 | 0.121 | 0.061 |
-08 | 1/2 | 0.656 | 0.125 | 0.061 |
-10 | 3/8 | 0.769 | 0.131 | 0.073 |
-12 | 3/4 | 0.941 | 0.169 | 0.073 |
-16 | 1 | 1.191 | 0.169 | 0.073 |
-20 | 1 1/4 | 1.503 | 0.169 | 0.073 |
-24 | 1 1/2 | 1.752 | 0.169 | 0.073 |
-28 | 1 3/4 | 2.127 | 0.169 | 0.073 |
-32 | 2 | 2.377 | 0.169 | 0.073 |