Durlon® 9000 Sheet Gasket Material
Gasket Resources Inc.’s Durlon® 9000 (blue) and 9000N (neutral) materials are designed for use in process piping and equipment in chemical, pulp & paper, pharmaceutical, oxygen & industrial gases, food & beverage and other general industrial applications.
These gasket sheets are excellent choices where physical properties such as non-contamination and resistance to highly aggressive chemicals are required.
Durlon® 9000 has been tested, approved and used for chlorine and caustics services. Unlike generic skived PTFE, the various shapes of fillers in Durlon 9000 are homogeneously blended with pure PTFE resins and do not wick or cause corrosion on flange faces.
Durlon® 9000 Benefits
- Recommended for a wider range of severe chemical services than competitive filled PTFE blends
- Maintains a tighter seal than conventional PTFE gasketing
- Has a higher bolt torque retention than other filled PTFE and conventional PFE gasketing materials
- Listed in Pamphlet 95 of the Chlorine Institute as an acceptable gasket material for chlorine service
- Certified for Oxygen Service by the Federal Institute of Materials Testing & Research: Berlin, Germany
- Conforms to FDA standards
- Exceptional performance in emissions control

Durlon 9000

Durlon 9000n
PTFE SHEET
Durlon Sheet Material Style
Type
Benefits
Download
Durlon
Datasheet
9000/9000N
Inorganic / PTFE
Designed for use in process piping and equipment in chemical, pulp and paper, food and beverage and other general industrial applications where resistance to high aggressive chemicals is required within a temperature range of -350° F to 500° F or with pressure up to 1200 psi.
9200W
Barium Sulfate/PTFE
Designed for use in aggressive chemicals. Including caustics, hydrogen peroxide, sodium hypochlorite, nitric acid, liquors and digester in pulp and paper service. Applications In the chemical, pharmaceutical and plastics industries include butadiene, hydrofluoric acid, vinyl chloride, methyl methacrylates, and styrene.
9400
Carbon/PTFE
Designed for use in piping and equipment in chemical, pharmaceutical, food and other general industrial applications where resistance to highly aggressive chemicals (including hydrofluoric acid) is required within a temperature range of -350°F to 550°F (-212°C to 288°C) or with pressure up to 1500 psi (10.3 MPa). Conforms to FDA requirements.
9600
Expanded PTFE
Designed for use in process piping and equipment in chemical, pulp and paper, food and beverage and other general industrial applications where resistance to highly aggressive chemicals is required. Suitable for use in steel flanges and flanges with irregular surfaces. Conforms to FDA requirements.
SIZES AVAILABLE
Durlon® 9000 is available in the largest sheet sizes of any conventional or filled PTFE blend gasketing in the industry which allows improved yield with less waste.
Available sheet sizes:
- 60″ x 60″
- 60″ x 120″
- 60″ x 180″

Durlon 9000