Spring Energized Seals for hydraulic fluid sealing. Designed for extreme and demanding applications.
A chart listing the most popular compounds and their fluid compatibility / technical information.
Seal & Design Canada: Toronto, Ontario 
Headquarters: Clarence, NY Flexitallic Metal Jacketed Gaskets
Flexitallic offers single jacketed and double jacketed metallic gaskets. These types of gaskets are typically used in heat exchanger applications. Seal & Design Inc. can help you select or design a custom metal jacketed gasket suitable to your specific application.
FLEXITALLIC SINGLE JACKETED GASKETS
The filler material is enclosed in a metal jacket which covers the inside and outside diameter of the gasket.
• Minimum flange width 6.4mm (1/4″)
• Nominal gasket thickness 3.2mm (1/8″)
Style 120
Style 120 has one of its contact surfaces covered and is ideally suited for comparatively narrow flange widths in circular and non-circular configurations. Style 120 is not recommended for standard pipe flanges.
Style 124
Style 124 is an overlapped Single Jacketed Gasket, where the filler is completely enclosed on the inside and outside diameters and on both contact surfaces. Style 124 is more suited for high temperature applications of narrow gasket widths. Typical low pressure applications include boilers, compressors, pumps, and diesel and gasoline engines.
FLEXITALLIC DOUBLE JACKETED GASKETS
Double Jacketed Gaskets are used on boiler and heat exchanger applications when ample bolting is available to correctly seat the gasket. They are designed for high pressure and temperature applications up to and inclusive of Class 900. Gasket widths as narrow as 8mm (5/16″) can be manufactured dependent on diameter. Very large gasket diameters can also be produced. Nominal gasket thickness is 3.2mm (1/8″). Gaskets can be manufactured with either integral or welded pass partition bars, in a variety of configurations.
• Gasket widths as narrow as 8mm (5/16″) can be manufactured dependent on diameter
• Nominal gasket thickness is 3.2mm (1/8)
Headquarters: Clarence, NY
Seal & Design Canada: Toronto, Ontario
